|
|
|
Avaya Partner Expansion Modules |
|
|
|
Avaya Partner ACS T1 Module - R 700241813
Includes One Year Manufacturer's Warranty
- Provides Up To 16 Lines via T1 Module
- Channels 9-24 Can Be Assigned
To Line or Pool Buttons
- RJ-45 Port
- Internal CSU
|
|
Qty.
|
|
|
The Partner ACS T1 Module provides 24 channels, but a maximum of 16 channels can be used for voice lines. (Channels 9 through 24 are used for voice.) These channels can be assigned to line or pool buttons and used for incoming and outgoing calls. The eight unused channels (channels 1 through 8), and any channels you do not use for voice lines, can be used for data connectivity by placing an external Channel Service Unit between the T1 Module and your T1 service provider. Supported in Release 6.0 and later systems. In addition to the 6.0 software, a T1 Patch, software upgrade is required.
- Provides up to 16 lines via T1 Module
- Channels 9-24 can be assigned to Line or Pool Buttons
- The Eight unused channels and any channels not used for voice can be used for data via External CSU / DSU
- Provides Direct Inward Dialing (DID) capabilities allowing calls to be routed automatically to
particular extensions, hunt groups, and calling groups
- Includes internal CSU for voice call connectivity and diagnostics to the T1 service provider
- T1 programming is performed through Partner ACS PC Administration software
- Contains one RJ-45 port to connect your service provider to the T1 module
- Provides three pairs of bantam jacks (Transmit, Receive, and Monitor) for maintenance testing and diagnostics
- Provides internal CSU for voice call connectivity to the T1 service provider and diagnostics
- To configure and maintain a T1 module, you MUST use the Partner ACS PC Administration Software. You cannot program a T1 module via System Programming from extensions 10 or 11
|
|
|
|
|
|